diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Solid State (https://www.diyaudio.com/forums/solid-state/)
-   -   Need a decent kit (https://www.diyaudio.com/forums/solid-state/27260-decent-kit.html)

Konnan101 31st January 2004 10:36 PM

Need a decent kit
 
Hey i have never really built an amp before, but it looks really interesting and i hope ot get good.

I realise that i can probably/most definatly not make my own amp froma schematic without atleast one practice round with a kit or something liek that. so i am wondering if anyone here has any suggestions to decent Amp or Preamp kits, or any sites that sell decent amp or preamp kits.

thnx a bunch

Easyamp 1st February 2004 03:49 AM

2 Attachment(s)
well if you do decide to build one from a schematic this is about as simple and cheap as it gets. This a stripped down p3a that works surprisingly well for it's lack of parts. It's only good for about 5 watts but can be made from fairly cheap.

If you would like to try this I can send you all the design and construction info.

JonPike 1st February 2004 12:00 PM

Check out the AKSA amp kit.. www.printedelectronics.com

Hugh Downs is a great guy, with a great attitude.. and has a wonderful set of kits.

55 and 100W amps, in a couple of stages.. he has a very good preamp in similar flavors and more.. high audiophile quality for very moderate prices.. and very well documented kits. Fairly busy user forum as well...

AKSA 1st February 2004 11:02 PM

Why Jon,

Thank you very much for your gracious comments.

Say, you're a nice guy too!

Cheers,

Hugh

lucpes 5th February 2004 07:02 PM

I just built the OPTI-MOS 200W kits from Randy Slone (as my first project ever). Everything come out as expected, sound quality is outstanding, I use them with old Infinity Reference II speakers which are a tough reactive load (1ohm load at 40Hz) and these have put many unsuspecting amps to 'their knees' so far. I'd recommend him with no reserve, the guy know his business, will help & guide you through every detail you may need. http://www.sealelectronics.com


All times are GMT. The time now is 11:08 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio

Wiki