diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Heatsink USA (https://www.diyaudio.com/forums/heatsink-usa/)
-   -   Pass Aleph style heatsinks (https://www.diyaudio.com/forums/heatsink-usa/238847-pass-aleph-style-heatsinks.html)

ticktock 7th July 2013 10:59 PM

Pass Aleph style heatsinks
 
I know this is a pretty old story. Many of us are seeking for these for years. ;)

Is there any chance to make a batch of these? :confused:


https://www.stereophile.com/images/a...693pass1.2.jpg

An externally hosted image should be here but it no longer works. Please upload images instead of linking to them to prevent this.


An externally hosted image should be here but it no longer works. Please upload images instead of linking to them to prevent this.

architect7 17th March 2014 08:49 AM

I would be interested :)

dady 17th March 2014 09:01 AM

I would be also

ticktock 8th April 2014 01:29 PM

What about Eastern Europe or Chinese vendors?

woody 8th April 2014 01:45 PM

I have a mini version of this lying around gathering dust. It might be good for a tiny min A with 12v rails.

bigfishe 18th November 2014 12:15 AM

Im in !!!!

BillWojo 25th November 2014 03:21 AM

I just stumbled onto this thread. I used to order custom extrusions and the way it worked was the extrusion die was custom made for me and left at the extrusion shop. I paid for the die and a minimum order of extrusion, usually 500 to 1000 pounds of it. Anyway, if you know who used to sell this etrusion they may point you to the extrusion house. At that point if the die wasn't scrapped they could run an order of it. May require a release form from the owner of the die.

BillWojo

needtubes 28th December 2014 09:16 PM

Wasn't there a group buy for clones of these chassis a couple years ago? Might be worth a look since this thread isn't getting any attention from the manufacturer even after 1.5 years...

mbrennwa 4th September 2019 05:50 PM

I know this is an old thread, but I am interested in this!

I recently had some good experience with a bunch of wave guides made by a 3D CNC online service (3Dhubs.com). Would that be an option?

mbrennwa 7th September 2019 09:56 PM

1 Attachment(s)
Would anyone be interested in getting a bunch of "Aleph style" heatsinks as shown in the attachment?

I am considering to run a batch of these, and if there is enough interest, that might even be affordable. Just let me know either here or by PM. If there is enough interest, I might start a group buy thread for this.


All times are GMT. The time now is 07:08 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio

Wiki