diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Elekit (https://www.diyaudio.com/forums/elekit/)
-   -   Installing USB_DAC module (PS3249) into TU-8100 (https://www.diyaudio.com/forums/elekit/223155-installing-usb_dac-module-ps3249-tu-8100-a.html)

vkung 8th November 2012 05:57 PM

Installing USB_DAC module (PS3249) into TU-8100
 
https://i243.photobucket.com/albums/...00E_Page_1.jpg

https://i243.photobucket.com/albums/...00E_Page_2.jpg

mrobertweiss 12th January 2019 06:49 PM

install USB 3249R DAconvertor in Elekit 8200DX
 
Where does one pick up the 5 volt DC supply to the usb module, from the 8200 board, if one does not wish to power the unit from the PC usb port? This appears to utilize the jumpers at 1,7,9 for "self" power as opposed to "B" for usb 3.3volt sourcing.
Most of the little manual is in Japanese, so I may be misconstruing how the component is to be used. The output from the DAC utilizes a 3.5 mm minijack which connects to another minijack next to the 8200 amp's Line 2 RCA inputs, (inactivating them when it is engaged)


All times are GMT. The time now is 08:28 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio

Wiki