diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Digital Source (https://www.diyaudio.com/forums/digital-source/)
-   -   NAD c565bee disc spinning noise (https://www.diyaudio.com/forums/digital-source/209911-nad-c565bee-disc-spinning-noise.html)

Joseph Crowe 1st April 2012 01:49 AM

NAD c565bee disc spinning noise
 
I'm overall happy with my NAD cd player but there is quite a bit of disc spinning noise, is this normal? Is there a remedy? It does this with all discs. I measured it at about 40db right at 4 kHz. It's a ticking noise.

Mooly 1st April 2012 06:36 AM

It sounds more like the optical pickup you are hearing rather than the disc/motor itself. The focus and tracking coils can be quite audible on some players. Scratches and defects on the disc can make the problem worse as the servo works harder to correct. You can also get a "white noise" or hiss from some pickups which can also depend on the servo settings. Worth making sure the disc runs "true" at the outer edge by looking edge on and slowly turning disc. There should be no up/down movement on the disc.

Don't attempt adjusting anything unless you know what you are doing.

carlabley 30th June 2020 09:05 PM

Nad565bee seems to not want to always go to standby after removing disc and it will only read out open or close but will not go to disc reading all of the time.


All times are GMT. The time now is 12:11 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio

Wiki