GB Thread for Salas SSLV1.1 BiB shunt reg
 

The group buy is for an updated Low Voltage shunt reg designed by Salas.
The GB is a working and approved relationship between myself, CRT and Salas.

The board will consist of three different reg's on one board. The board is V-Scored and can be broken into three boards, two boards etc.

On each full board there is a two positive regs and one negative rail reg.

Extra mini-kits (partial kits) are available to support building of the board - but leave out caps and some resistors that are unique to each voltage build and type of device it's powering.

MiniKit BOM section. This links goes to full details of all the parts included in the kits and there respective positions on the board.
Salas Board Minikits and Full Kits - diyAudio

The boards will sell for $25 each, with $8 minimum shipping, paypal only, no extra fees.
The group buy sign up sheet will be on my signature.


Salas has written a build guide, URL below. It will explain more technical details.

The calculator is used to help guide one to the parts they will need to set voltage correctly.

SALAS REG SSLV1.1 BIB GUIDE REV2

Shipping cost 6 up to 3 pcbs/8 USD up to 6 domestic and overseas?
ETA?

Add me to the list with two boards.

BR

Would it be possible to use these with the Buffalo DAC?

Shipping will generally be $6 dollars for up to 2-3 full sets (lets call them that for less confusion. After that, likely 8 USD for more.
This includes domestic and overseas shipping. I try to provide the same cost to everyone. It usually works out.

Sure can. I believe some of the older boards are being used with a Buffalo Dac.
This will provide more options.

First round GB end June 30th 2011. Should be able to pay up until that day.

Are you using Tridents?

In this version any Vref drift is downwards going.;)

why there Is no IRF240 / 9240 - can I use them
also what Is current limit