KF-850zR and 850b internals - Using Autodesk Inventor and CNC
Noob here, but have been building sound systems for almost 20 years. The current project is an 850z and b stack. I have all of the components (drivers, horn) on order, the external drawings complete, and am just missing a few dimensions.
850b - Length of reflex port
850zR - diameter of 15" and 10" horns.
I'll share the drawings and parts list when completed. I do have a source for the radial phase plug, but any suggestions on this front would be appreciated too.
|All times are GMT. The time now is 10:35 AM.|
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio