diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Solid State (https://www.diyaudio.com/forums/solid-state/)
-   -   Citronic PPX2400 Schematic (https://www.diyaudio.com/forums/solid-state/133691-citronic-ppx2400-schematic.html)

SilverSurfer 23rd November 2008 08:33 PM

Citronic PPX2400 Schematic
 
Hello,

I'm reparing a PPX2400 but I haven't the schematic to help me.

Is someone can provide me the schematic for this amplifier ?

Thanks a lot,
;)

krmaudio 4th December 2008 03:08 PM

schematics
 
Try skytronic, they bought the citronic brand, and did have some schematics on their site a while ago, you may have to contact their technical department and ask if they still have a copy.....

And there is a seller on ebay currently selling genuine citronic ppx amp power switches, apparently they bought all the spares, thats about all i can tell you.......

SilverSurfer 7th December 2008 12:50 PM

Hello,

I get back the schematic, I replaced the Power MosFet.
I boken 3 of then at the first power on. I think that's a problem with the polarisation courant setup !

Did you repaired your PPX2400 ??
If yes , what was your problem ?

Regards,

krmaudio 8th December 2008 09:14 AM

hello,

i have not repaired the ppx 2400.

i have repaired lots of ppx 900 and ppx 1200 and 1600.

a few mosfets gone and lots of burnt resistors ans caps usually, no rocket science.......

glad you are done

SilverSurfer 17th December 2008 12:28 PM

Hello,

The PPX 2400 is repaired.

I changed the 6 power MOSFET (250W) + the triac (on short cut to GND).

I have some power MOSFET on spare if you need of it !



REGARDS,

krmaudio 17th December 2008 12:37 PM

hello,

The ppx1600 was similar changed 5 fets.......

are the buz devices in the ppx2400?

SilverSurfer 17th December 2008 01:07 PM

Yes BUZ901D and BUZ905D ( Dual MosFet 250W)

Take care, this kind of MosFet can't be touch with your hands without static protection.

You can damage this kind of device !

Other critical point : The bias currant to ajust with an osciloscope.

Do you want some help to repaire your amplifier ?

krmaudio 17th December 2008 04:26 PM

hello,

i have repaired the ppx1600 a few weeks ago, it has hitachi fets in it.....i dont like the buz devices, the hitachi were very strong transistors....glad you got yours fixed.........


All times are GMT. The time now is 03:04 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio

Wiki