diyAudio (
-   Multi-Way (
-   -   Phase EQ using FIR filters (

Grasso 26th March 2003 07:23 PM

Phase EQ using FIR filters

has anyone some experience in this? I have a real-time DSP platform ready to work with ( ), but I still miss rudimentary FIR coefficient types. How does a phase EQ look like?

Then there is the question if an über-alles EQ is sufficient. In case of horn speakers, delays are big, hence seperate delay lines and EQs must be used.

This is not solely about an optimized phase at 0° angle but also for acceptable amplitude and phase characteristics at different radiation angles. A speaker which can produce 110dB SPL at any frequency and at a radiation of +-40° hor. and +-20° ver. cannot have a perfectly flat phase but must find a balance.

DSPs are a powerful and dangerous tool, which if justly used can enhance sound quality. Any comments welcome.

phase_accurate 26th March 2003 08:30 PM

If you want to time-align horns, then a constant (i.e. frequency independant) delay would be a good start.



Grasso_new 2nd July 2003 11:37 PM

The results
Hi all,

see for my findings.


All times are GMT. The time now is 10:27 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio