Phase EQ using FIR filters
has anyone some experience in this? I have a real-time DSP platform ready to work with ( http://grassomusic.de/english/m56k.htm ), but I still miss rudimentary FIR coefficient types. How does a phase EQ look like?
Then there is the question if an über-alles EQ is sufficient. In case of horn speakers, delays are big, hence seperate delay lines and EQs must be used.
This is not solely about an optimized phase at 0° angle but also for acceptable amplitude and phase characteristics at different radiation angles. A speaker which can produce 110dB SPL at any frequency and at a radiation of +-40° hor. and +-20° ver. cannot have a perfectly flat phase but must find a balance.
DSPs are a powerful and dangerous tool, which if justly used can enhance sound quality. Any comments welcome.
If you want to time-align horns, then a constant (i.e. frequency independant) delay would be a good start.
see http://grassomusic.de/e/phaseeq.htm for my findings.
|All times are GMT. The time now is 10:28 PM.|
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio