I have a pair of Denon POA-6600 monoblocks. They have a 12VDC input socket for remote power switching. I'd like to use the DC control output from my Nakamichi CA-7 to control these, but it appears to have a 24V signal out.
Questions:
1. Is the DC input of the Denon voltage-free?
2. Can I connect the 2 Denon inputs in series to split the Nak's 24V, or should I just reduce this to 12V level externally?
Thanks for any help!
Questions:
1. Is the DC input of the Denon voltage-free?
2. Can I connect the 2 Denon inputs in series to split the Nak's 24V, or should I just reduce this to 12V level externally?
Thanks for any help!
Have you done any Googling?
Keywords: Denon POA 6600 schema schematic
http://www.minhembio.com/forum/index.php?showtopic=115469&st=150&p=1043825&#entry1043825 scroll down a bit.
Keywords: Denon POA 6600 schema schematic
http://www.minhembio.com/forum/index.php?showtopic=115469&st=150&p=1043825&#entry1043825 scroll down a bit.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.