diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Multi-Way (https://www.diyaudio.com/forums/multi-way/)
-   -   Anyone using Tang Band W4-1337? (https://www.diyaudio.com/forums/multi-way/108059-using-tang-band-w4-1337-a.html)

ghetto 6th September 2007 02:02 AM

Anyone using Tang Band W4-1337?
 
2 Attachment(s)
This little driver really has caught my attention. I have searched and found only limited mention of this driver both on diyaudio and the web in general... though Zaph has measured it and seemed fond of it.

Bear in mind two things, I have never designed a loudspeaker, but also it interests me to use this driver nearly full range.

- Would a simple notch filter be suitable for taming the top end of this driver's response?
- Is 150Hz-20kHz a reasonable bandwidth to run this driver?
- For the above bandwidth, I should use a sealed enclosure, correct?

I'll leave my questions at that for now - hopefully they are not too idiotic! Hope to see some responses. :cool:

theAnonymous1 6th September 2007 02:12 AM

Wow, 1337 Tang-Bands. They should make good PC gaming speakers.:clown:

augerpro 6th September 2007 04:14 AM

Several DIY designs for this driver have recently been done. Here area couple: http://htguide.com/forum/showthread.php4?t=25932
http://htguide.com/forum/showthread.php4?t=27222
http://htguide.com/forum/showthread.php4?t=26939


All times are GMT. The time now is 06:57 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio

Wiki