Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Power supply rail sag
Power supply rail sag
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 26th November 2006, 06:37 PM   #1
ash_dac is offline ash_dac  United Kingdom
diyAudio Member
Join Date: Jan 2005
Location: UK
Default Power supply rail sag


As a power amplifier power supply rail "sag's" I assume it makes it more likely that clipping occurs.

Are there any rail sag effects on distortion generally before the clipping point is reached?

  Reply With Quote
Old 26th November 2006, 08:07 PM   #2
jackinnj is offline jackinnj  United States
diyAudio Member
jackinnj's Avatar
Join Date: Apr 2002
Location: Llanddewi Brefi, NJ
Power supply rail sag
The supply rail droop is approximately:

E = I * t / C

you usually think of t as some period shorter than a half-cycle since the diode does not conduct the entire time.
  Reply With Quote
Old 26th November 2006, 08:36 PM   #3
Duo is offline Duo  Canada
diyAudio Member
Duo's Avatar
Join Date: Jun 2002
Location: Victoria, BC, Canada
Send a message via ICQ to Duo
Depending on the design and operating conditions of the amplifier circuit, power supply droop could cause anything from detestable to immeasurable effects on distortion.

Something with really good power supply rejection should have no troubles here.

Something like a resistively loaded class A stage on the other hand could show drastic changes in characteristics with a power supply voltage change (thus why big caps or good regulators are needed).

I have some topologies for large power output (1000W+) that operate without any noticeable effect down to +/-1.5V which goes to show that a normal power supply droop will cause no need for concern.

You just have to look at how your specific amplifier deals with this.
  Reply With Quote


Power supply rail sagHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Using split rail supply for single rail DC DanX Chip Amps 1 15th March 2008 05:18 PM
Building a dual rail battery power supply? pjpoes Parts 4 22nd January 2007 08:10 PM
RAIL power supply / BI Amping question Bifi01 Solid State 4 24th August 2004 06:02 AM
netgative rail switching power supply millwood Chip Amps 1 21st July 2003 08:40 PM
Using fuses on VDC Power Supply Rail? Lucas_G Pass Labs 4 22nd December 2002 09:37 PM

New To Site? Need Help?

All times are GMT. The time now is 11:15 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio