How should I change the component values of this Ringing Choke converter smps circuit (op. 9v 230 ma) to get o/p of 5v 2A?
Needed for a portable class A amplifier.
There are mobile chargers of same rating but want to make it myself.
I already have a 5v 2a flyback transformer from a charger.
Replies sans rhetorics will be just fine.
Thanks.
Needed for a portable class A amplifier.
There are mobile chargers of same rating but want to make it myself.
I already have a 5v 2a flyback transformer from a charger.
Replies sans rhetorics will be just fine.
Thanks.
Attachments
Well, as far I figured out, the zener and Vbe holds the key, a 4.3 v solves one part, but for Vbe, R1 & R2 must be changed, but I dont have simulators, so this post.9 V x 0.23 A = 2 W, but you want to get 10 W. It can be too much...
Yes, I have 13003/5 in mind, the metal casing would be a fine heatsinkFor 2 amps you should consider a TO-220 rectifier mounted on some heatsink
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.