Hi All. Thanks for all the suggestions. The case I'm using is salvaged from an old amp and it's a really heavy duty case so weight shouldn't be a problem. The transformers are Antek as you mentioned. They weigh about 13 lbs. each and are about 6 1/4" in diameter. The case also has a lot of height (about 10 1/2"), so I thought I would build a two level platform to hold them both. That way I could leave about 1 1/2 inches between them for cooling. Does that seem reasonable?
Best Wishes,
Bob
Best Wishes,
Bob
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.