Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

laying out dual output push-pull transformer?
laying out dual output push-pull transformer?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 2nd September 2008, 09:50 PM   #1
zilog is offline zilog  Sweden
diyAudio Member
Join Date: Oct 2005
Default laying out dual output push-pull transformer?

I am in the process of deciding how to wind the ETD29 transformer for my center-tapped push-pull smps. The transformer will have two center-tapped primaries, and two center-tapped secondaries.

I guess the windings should be laid from the coilformer and up as: SPPS since only one primary conducts current at a time, while both secondaries carry current simultaneously (full-bridge rectification), and I want to minimize inductive energy storage between the windings.

The real question is how I should place the ends of the windings on the coil former, since each winding-half is calculated to fill one entire layer of the coil former, I cant get around having the (C) end of the primaries on the opposite side compared to the transistor-ends (A and B), the same goes for the secondaries, where S1 and S2 each fill one entire layer.

I have illustrated this in a sketch: http://wintermute.csbnet.se/~zilog/pushpull_ee_smps.jpg

Any suggestions as how to do this better? I would prefer to have all connections to the primaries on one side of the coil former, and all that belong to the secondaries on the other side, to give a clean separation of the smps in an input and an output half .
  Reply With Quote


laying out dual output push-pull transformer?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
6C33B-C push pull with output transformer vincent_brient Tubes / Valves 24 3rd January 2018 07:43 PM
Difference between SE output transformer and push-pull output transformers hilbert_mostert Tubes / Valves 12 8th March 2009 06:10 PM
Output transformer push pull om kalsoum Tubes / Valves 7 7th May 2007 10:48 PM
Push Pull Output Transformer wiring problem cyl Tubes / Valves 8 25th April 2007 03:23 AM
Transformer coupled 6SN7 push-pull DAC output stage? cathode_leak Tubes / Valves 7 24th January 2005 08:26 PM

New To Site? Need Help?

All times are GMT. The time now is 04:36 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio