Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

IEC Inlet Filter confusion
IEC Inlet Filter confusion
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 31st July 2008, 10:17 PM   #1
jkeny is offline jkeny  Ireland
Join Date: Feb 2007
Location: Dublin
Default IEC Inlet Filter confusion

I rescued a Schaffner IEC inlet filter from an ADAT M/C before I sent it to scrap to put on some equipment. I put it on the inlet of a tube amp that I'm rebuiling. This amp has a turn on switch and before I use it I tested the power to ensure that all is OK.

Strange, I get a slightly lower voltage accross N & L when switch is off then when switch is on. This confuses me - is the current very low accross N & L when switch is off And high when switched on?

It is the FN 9246 High performance IEC inlet filter I have from here: http://www.schaffner.com/components/...22.asp?level=3$2$2&language_id=12&regUser=1&regUserID=-1

This unit has a 470K ohm resistor between L & N which would give rise to this reading? Just trying to confirm that all is in order & understand what's going on
  Reply With Quote


IEC Inlet Filter confusionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wiring an IEC inlet mourip Parts 5 31st January 2013 07:02 PM
Cap or caps on ac inlet ? ROVSING Chip Amps 27 2nd January 2011 08:38 PM
IEC Inlet with or without line filter for CD transport? pooya Digital Line Level 7 23rd August 2009 07:58 AM
IEC Inlet filter issue jkeny Solid State 23 2nd August 2008 05:31 PM
Replacing C7 inlet on the Panny 45 neilr11 Digital Source 0 25th December 2004 01:04 AM

New To Site? Need Help?

All times are GMT. The time now is 02:12 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio