|18th December 2018, 02:52 AM||#1|
Join Date: Feb 2012
Location: Tulsa, OK
I've begun to build a pair of mFonken103SolT -- the trapezoidal fonken enclosure for FF105WK but for the FE103Sol, using the alternate vent spacing included at the end of the FF105WK fonken planset. I might ask for some pointers on construction, but at the very least I figured this thread might be useful for other relatively novice builders who want to try one of the trapezoidal designs.
There is enough material left over to make a pair of Classic Golden Ratio enclosures, which I'll be doing at the same time (will post in the pic thread when done). These will be my third and fourth speaker builds, following a pair of Woden Shrike and Falcon, which are really good.
Material is 15mm Baltic birch, along with three 9mm boards of red oak and Brazilian cherry for the vent spacers. The different colors will make for an interesting pattern on the baffle, though I might end up veneering these. We'll see.
All panels were cut to rectangles today, with the width slightly wider to allow for margin of error when making the bevel cuts (will figure out how to do it on scrap first). The cut list in the plans made this really easy!
The plans call for 1/2" UltraTouch denim insulation, which doesn't seem to be available anymore, so I could use suggestions on good alternatives.
There's the 1/2" acoustic damping foam at Parts-Express:
Sonic Barrier 1/2" Acoustic Sound Damping Foam with PSA 18" x 24"
As well is this wool batting with a 1/4" loft. Perhaps it would work by doubling it up.
Amazon.com: Pellon W-72 Twin Size Wool Batting, 72" by 96", White: Arts, Crafts & Sewing
Any recommendations? What works for you?
Last edited by jdrouin; 18th December 2018 at 02:54 AM.
|18th December 2018, 04:48 AM||#2|
Amazon.com: Buying Choices: 16 in. x 48 in. Denim Insulation Multi-Purpose Roll (6-Pack)
I order it from amazon. Nice stuff, seems to work very well.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Transmission Line Speaker Build using Alpair 7.3 speakers, first build.||vishalk||Full Range||123||29th March 2017 12:22 AM|
|Super Squirrel Monkey - First from-scratch tube amp build, first guitar amp build||ericj||Instruments and Amps||32||5th April 2016 10:28 PM|
|question:How to build How to build music player with tda1543 use rapspberry pi B+?||gary095315||Digital Source||1||30th December 2015 07:35 AM|
|build my first full ranger,let's build another one:a small fullrange high end pc-spea||then_dude||Full Range||2||30th November 2005 07:54 AM|
|Do i need to build main supply (240v) filter?Or build power distribution?||thomgun_lc||Chip Amps||9||16th September 2005 09:52 AM|
|New To Site?||Need Help?|