Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Planars & Exotics ESL's, planars, and alternative technologies

New idea: Make a thick ribbon thinner
New idea: Make a thick ribbon thinner
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 8th August 2005, 12:48 PM   #1
APi is offline APi  Finland
diyAudio Member
Join Date: Nov 2004
Location: Oulu
Default New idea: Make a thick ribbon thinner

I just came up with an idea I havenīt seen before.

Materials for thin ribbons are hard to find and handle. Why just not use thicker materials and after a ribbon has been cut, then make it thinner?

You can use acid like ferric chloride. Test how long it takes to dissolve you foil totally. Then just calculate how much it takes to have right thickness. Put a cut ribbon into liquid, wait exactly the right time and take it out. Wash gently in slightly caustic water to neutralize pH on the ribbon.

While I personally do laminates, thought to do the same thing for them. But itīs harder.

You can slide a laminate over some kind of grinder with constant speed and have exactly right tension. After each turn measure thickness. Or then just have an area which has been grinded more and stop when it wears out. You should have an (self-made) equipment to do that but in theory this is possible.
  Reply With Quote
Old 8th August 2005, 02:23 PM   #2
tade is offline tade  United States
diyAudio Member
Join Date: Feb 2005
Location: Ralieigh nc
Send a message via AIM to tade
that is a good idea. I have no way to comment further just though i would show support!
  Reply With Quote


New idea: Make a thick ribbon thinnerHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
could you make a transformerless short ribbon work with a series Xover Puggie Planars & Exotics 6 2nd July 2013 05:39 PM
3/8in thick acrylic - would this make a good chassis? jarthel Tubes / Valves 8 22nd May 2006 01:34 PM
Case idea to make you resin-ate Nordic Chip Amps 16 22nd September 2005 03:19 AM

New To Site? Need Help?

All times are GMT. The time now is 12:05 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio