Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Planars & Exotics ESL's, planars, and alternative technologies

Ribbon Tweet mounting Depth
Ribbon Tweet mounting Depth
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 26th December 2004, 09:28 AM   #1
dunderchief is offline dunderchief  United States
diyAudio Member
Join Date: May 2003
Location: Everett, WA
Send a message via AIM to dunderchief
Default Ribbon Tweet mounting Depth

Hi there,

I've come accross a situation that calls for an absolute minimum in mounting depth. I'd really like to use a Ribbon, but most of the ones I've been looking at have at least a 3" mounting depth. Namely the Raven R1 and AC G2si, both have the transformer mounted directly on the back of the driver.

My first question is: Is there a way to unmount the transformer from the casing and allow it to be mounted away from it, on the tweets that have this feature. Still very close to the casing, but just not right behind it. If I were to choose the Raven, would I be able simply to unscrew or detach the transformer easily?

Second Question: Are there any other options for ultra shallow depth ribbon tweets out there. I'm only looking for 5-6k on up.

Thanks in advance
  Reply With Quote
Old 26th December 2004, 12:30 PM   #2
CV is offline CV
diyAudio Member
Join Date: Nov 2002
Location: UK
Default no prob

...with the aurum cantus - you can just unbolt the transformer. It's basically an aluminium rod with the magnetics potted over it, the ends of the rod bolt to the tweeter plates and form the connections. Be sure to use very low impedance wiring...
  Reply With Quote
Old 27th December 2004, 08:39 AM   #3
inertial is offline inertial  Italy
diyAudio Member
Join Date: Aug 2004
Location: Italy
Default Isodynamics

Hi Dunderchief,
What about BG NEO's drivers? ( The same used in the new MartinLogan's AV speakers, if anyone have noticed........)
Also Eton ER4 can work ( his frequency response is very similar
to the NEO3 PDR in the same conditions)

  Reply With Quote


Ribbon Tweet mounting DepthHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for small Ribbon Tweet Jlace Car Audio 3 11th April 2007 08:39 AM
what is the mounting depth and mounting diameter of this? lemans23 Multi-Way 2 26th October 2005 11:52 PM
Ribbon Tweet suggestions.... eastcoast Planars & Exotics 0 28th March 2005 08:33 AM
socket mounting depth tenderland Tubes / Valves 10 17th March 2005 02:55 PM
Tweet/mid flush mounting Puggie Multi-Way 3 17th January 2005 07:11 PM

New To Site? Need Help?

All times are GMT. The time now is 10:15 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio