Paper Sandwich ribbon

[ABJensen]

The Ribbon transformer

 

[ABJensen]

Not that powerfull after All.

 

[båndsei]

May be not at that distance.
Is the transformer made for ribbons?
What is the resistance in the ribbon? 0,5 ohm?
Looking good.

Bernt

 

[ABJensen]

Yes the Transformers are made for Ribbons.
Don't know what the resistance is maybe 0.1-0.2 ohm.
I will measure everything later

 

[ABJensen]

This does not look like what I had hoped for finish wise. But the magnetic field really strong. Nothing like the old apogee copies I made

 

[Baldin]

Cool project

 

[ABJensen]

Return wire on bitumen. Make it Up as I go along

 

[ABJensen]

Set back lost my alu solder and fluss. Any where where that can be bought ?

 

[båndsei]

An externally hosted image should be here but it was not working when we last tested it.

Jeg har et billede her
Det virker ikke
Det her måske

An externally hosted image should be here but it was not working when we last tested it.

Virker heller ikke.
Bernt

 

[båndsei]

Fluss


Her måske
Jeg kan ikke huske hvor jeg købte det

Sorry I wrote in Danish

Båndsei

 

[ABJensen]

Tak skriver på dansk. Det står på russisk ;-)

 

[båndsei]

You are right
Can you use the picture?

I have a bit to share.
I used normal solder to go with the fluss

Bernt

 

[ABJensen]

Found the fluss. Made the first hooked it to my bluenote that has a crossover at 80 Hz to a sub. Very little ribbon movement. Most be the powerfull magnetic field

 

[ABJensen]

How do you export from DATS. Photo scale 5-10 ohm. Around 6.7 ohm .

 

[ABJensen]

Single male living room. Everything in backorder. Mic streamer remote.Dropped one of the fusion Amp on the floor repair . But Nick Cave through telly Sound really awesome

 

[ABJensen]

Got the other speaker painted . Looks baaad but nevermind, they are just test speakers, the one that is the end point will be over 2 meters and cnced.

 

[TNT]

Nice ribbons. The white round ones, what are those?

//

 

[ABJensen]

Nice ribbons. The white round ones, what are those?

//

Elipson sound ok with a sub. High WAF

 

[TNT]

OK!! Thanks!

//

 

[båndsei]

Theese magnets must be very difficult to handle.
Do you use glue?
I remember you use 10mm.x 40mm. iron

Bernt