As the tittle said i plan to build a F1 for may Fostex FE168ES in Back Horn
The construction is here it's in french but there is enough pictures.
http://idefixes.phpnet.org/sections.php?op=viewarticle&artid=6
I have in hand enough filtering capa and a empty amp case from a past project with good amout of heathink.
The Idea was to realise the F1 since these sort of amp match very well with full range speaker as fostex.
Since I have on hand 200 IRFP044 for 2 Aleph X project i ask me if it's a silly idea to replace IRFP240 by 044, in the diff paire but in CCS to. In ZenV2 there one IRFP044 CCS modele. The friend that allway help me is to busy to spend time on that
I 'redrawn my F1 idea schématic
Marc
An externally hosted image should be here but it was not working when we last tested it.
The construction is here it's in french but there is enough pictures.
http://idefixes.phpnet.org/sections.php?op=viewarticle&artid=6
I have in hand enough filtering capa and a empty amp case from a past project with good amout of heathink.
The Idea was to realise the F1 since these sort of amp match very well with full range speaker as fostex.
Since I have on hand 200 IRFP044 for 2 Aleph X project i ask me if it's a silly idea to replace IRFP240 by 044, in the diff paire but in CCS to. In ZenV2 there one IRFP044 CCS modele. The friend that allway help me is to busy to spend time on that
I 'redrawn my F1 idea schématic
An externally hosted image should be here but it was not working when we last tested it.
Marc
You should be able to just drop the IRF044 in place of the IRFP-240. If you want to also replace the IRFP9240s with IRF044s, take a look at the Zen Variations 2 article.
Roscoe
Thanks!
Since the schematic shows a balanced front end is all one needs to do to run it with a RCA cable is to hook the negative of the RCA cable to the minus input. This is for someone building from the schematic only. Page 6.
http://www.firstwatt.com/pdf/prod_f1_srv.pdf
http://www.firstwatt.com/pdf/prod_f1_srv.pdf
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- An another way to Firstwatt F1?