Can Bride of Son of Zen power supply be used with

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
T

Tony D.

Member
Joined 2001
a DACT CT-101 pre amp module? A friend has purchased the DACT and is thinking of using the power supply section of the BOSOZ.

The DACT requires a +24 0 -24 volt supply and I know that the BOSOZ PSU can be derated to lower voltages but I am unsure if it represents a + 0 - type supply.

Any info is appreciated.


Tony D.
 
F

Freddie

Member
Joined 2000
Yes it can be used, but you have to remove a couple of zener diodes. For example three 9.1V zener diodes (instead of six) in series will create 3 * 9,1V = 27,3V at the gate of the mosfet. This will create around 27,3 - 3,5 = 23,8V (The 3,5V is lost over the mosfet)

/Freddie
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom