Heatsinks for Bosoz?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
promitheus said:
on the power supply board there are caps across the diodes, then parallel to the big caps and that the output.
They all are blue and look like they are from the same brand.
Are they mkp or mkt?
I bet they are Rifa polypropylene's. The best you can use for diodesnuppers are Rifa PHE450's, they are very robust critters. (Alternatively, X2 rated caps are also very good and robust)
For bypassing the electrolytics, the best are (soundwise) the PHE426's. Both can be had from ELFA.

Steen:)
 
Hi Kari,

Do you have any boards left over? I ordered a few of each, but didn't receive any after the last round of shipping. I've pretty much written them off, but I thought I would ask since I never got a response to any of the emails I sent you in the past. Feel free to send me an message through the forum if you don't want to discuss it here.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.