Hi Nelson. Iyo, is this a worthwhile exercise? Would I likely hear a difference?
So that must be why the early Meridian 105 monos were so good... separate chassis for amp/psu.
I'm now sorry I sold an Acoustat TNT120. No separate psu but so quiet(in hindsight)... I think, that it kept me on the edge of my seat. It was unnerving. It made me think information was missing in the signal. Infinite depth perspective.
So that must be why the early Meridian 105 monos were so good... separate chassis for amp/psu.
I'm now sorry I sold an Acoustat TNT120. No separate psu but so quiet(in hindsight)... I think, that it kept me on the edge of my seat. It was unnerving. It made me think information was missing in the signal. Infinite depth perspective.
Last edited:
It is likely to lower the noise. Most who are trying to achieve
that would move the transformer right out of the chassis.
If I was to move the transformer out of an F5T chassis, would the entire power supply with RC filters move also? Or just transformer and diodes with 1/2 total RC filter, with the other 1/2 of RC filter in the amp chassis?
.......just transformer and diodes with 1/2 total RC filter, with the other 1/2 of RC filter in the amp chassis.....
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.