SissySIT

Those insulating shoulder washers look great, prasi1170.

I have access to a cool little device called a Cameo Silhouette that does an excellent job cutting patterns from gasket and related sheet materials. Can anyone provide a dwg or solidworks file for the thermal pad?

BK
 
this is very kind of you - I have not been able to source them locally and had planned on trying to make something for myself.

..dB

This is just a time, I need time. I left the store in the afternoon, suspended business, and bought these. This is actually very simple. Many times, because I don’t speak a lot of English, it leads to errors in translation software.

In fact, the person to be thanked is ZM. He knows me better, knows that I am using translation software, and it is very clear. He sent pictures to me. I only know what it is. These things are actually what I have seen. Something, once bought these, this 4M small particles, was a long time ago, placed in the warehouse, only tonight, so I quickly took pictures, posted to everyone
 
Those insulating shoulder washers look great, prasi1170.

I have access to a cool little device called a Cameo Silhouette that does an excellent job cutting patterns from gasket and related sheet materials. Can anyone provide a dwg or solidworks file for the thermal pad?

BK

Thank you, what are you talking about?

Is it about cutting insulation sheets?
Does it mean that you have the right scissors, and then you can cut the mica sheet, the same size as the SIT, right?
 
Official Court Jester
Joined 2003
Paid Member
finally done with soldering tiny bugzzzz on first batch of Babelfish M25/SissySIT
pcbs

tomorrow some cleaning of no-clean flux (just for giggles) , then on to sorting parts and packing

also start working on tutorial , to ease some things for Greedy Boyz
 

Attachments

  • WP_20181011_20_35_05_Pro.jpg
    WP_20181011_20_35_05_Pro.jpg
    152.6 KB · Views: 512
  • WP_20181011_20_35_25_Pro.jpg
    WP_20181011_20_35_25_Pro.jpg
    128.5 KB · Views: 520
  • WP_20181011_20_35_36_Pro.jpg
    WP_20181011_20_35_36_Pro.jpg
    117.5 KB · Views: 527
  • WP_20181011_20_35_49_Pro.jpg
    WP_20181011_20_35_49_Pro.jpg
    86.9 KB · Views: 514
Official Court Jester
Joined 2003
Paid Member
.....
 

Attachments

  • WP_20181011_17_00_34_Pro.jpg
    WP_20181011_17_00_34_Pro.jpg
    72.2 KB · Views: 194
  • WP_20181011_17_00_23_Pro.jpg
    WP_20181011_17_00_23_Pro.jpg
    79.9 KB · Views: 181
  • WP_20181011_16_57_56_Pro.jpg
    WP_20181011_16_57_56_Pro.jpg
    91.3 KB · Views: 186
  • WP_20181011_16_57_49_Pro.jpg
    WP_20181011_16_57_49_Pro.jpg
    90.1 KB · Views: 201
  • WP_20181011_16_57_43_Pro.jpg
    WP_20181011_16_57_43_Pro.jpg
    96 KB · Views: 204
  • WP_20181011_16_55_19_Pro.jpg
    WP_20181011_16_55_19_Pro.jpg
    111.3 KB · Views: 205
  • WP_20181011_16_54_32_Pro.jpg
    WP_20181011_16_54_32_Pro.jpg
    103 KB · Views: 1,194
Member
Joined 2007
Paid Member
THF-51S fit the bill?

Good morning ZM and esteemed thread readers,

I got 4 trannies from Japan and curve traced them. What I get is different from what I have seen here before. My Sits show very low negative (so in fact very high) Vgs - roughly about 1,8V at 1A Id, which is what I want them to bias with. Even ZM once wrote here, he considers virtually all THF-51S convenient for this amp, I would feel better if I got some confirmation that mine might work. Otherwise I would ask Pras1170 for a pair.

Here is what I got:

THF-51s_b.jpg

Cheers

Ernst
 
Last edited: