what's wrong with some reading of enclosed *.pdf?
dunno ...... either sealed or vented
who cares ..
Must have missed that part in the .PDF
I care. Learn from da master by example.
I had assumed you had actually seen a pair.
Fogeddaboutit, I'll just get my own set and see for myself
Last edited:
dodos, do your reading:
The infinite baffle enclosure for this system is structurally stabilized and visually enhanced by a massive four foot high heat sink at the rear of the speaker, elegantly curved and rendered wood sides and beautifully machined and polished stone tops, bottoms and fronts.
The infinite baffle enclosure for this system is structurally stabilized and visually enhanced by a massive four foot high heat sink at the rear of the speaker, elegantly curved and rendered wood sides and beautifully machined and polished stone tops, bottoms and fronts.
I think DIY open baffle with 15" woofer is the right way to go. These factory super high-end speakers are too expensive for most people. There are also the big horn system from Oswalds Mill Audio: Oswalds Mill Audio | OMA …...but again only few people can get these. I spent about 150 hours building my OB speakers......but it was worth the effort. It always takes longer than expected. Large efficient speakers is a must to get the dynamics in the music…...that is my conclusion.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.