|18th April 2004, 11:44 PM||#1|
Join Date: Jan 2004
New proud owner of Aleph 5
I became a proud owner of an excellent amp Aleph 5. It was tough job for me because it is my first DIY project, but I did it and now it's up to you to judge.
Dual mono construction with two 350VA 2x28V toroids. 8 (4 per channel)BC components electrolytics 33000uf 63V series 154. Excellent caps. One 50A high quality rectifier per channel. Silver plated copper wire throughout PS. 5mm copper plates to connect caps and keep them together.
Kristijans PCBs. Riken resistors, Black Gate Std and FK series 220uf caps. Jensen copper in oil 47nf cap. Mills 5w source resisors 1R and 0.5R. FETs matched to 0.05V. Differential pair to 0.01V. Silver wires for input and output. WBT speaker terminals and Audio Note silver RCA connectors.
I had some problems with grounding (terrible humm) but after experimenting and changing ground scheme few times I succeded in removing humm completely. If there is anybody
interested in the grounding scheme I implemented in the amp I'll be happy to post it here.
Sound is just marvelous. Transparent, detailed and microdinamics is awesome. Soundstage just "exploded" all around my room. I never heard something better than that, and I used and listened to a lot of mid-fi amplification systems. I have to let it burn in for at least 100 hours (Black Gates). Temperature on the heatsinks is around 55 degres Celsius.
I ordered Solens 2.2uf for the bypass in PS, and I'll use the 2uf cap across Zener diode Z5 as Master suggested.
Any comments and suggestions are welcome.
Thanks everybody for help, and especially one big Thank you very much to Nelson and the Pass Labs crew.
|19th April 2004, 01:32 AM||#7|
Join Date: Jan 2003
Location: Texas, Love it or leave it
What is this...2 1/2 hours and nobody has told you what a wonderful job you did....let me be the first.
Bonito. A lot of money and time very well spent.
Be warned. If you reconnect one of those mid fi units, you won't be able to stand how awfull it sounds after listening to an Aleph for a week.
Good job. And I would be interested in ground changes. I'm most interested in what hummed so I can avoid it.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|another reason to be proud...||tomtt||The Lounge||31||29th February 2020 11:24 AM|
|YES! i,m now the proud owner of a working LM4780 amp||zei||Chip Amps||11||30th October 2005 10:42 PM|
|Proud new owner of 4ch LM3875||quickshift||Chip Amps||2||18th August 2005 05:41 PM|
|Proud owner of a new GC||amisdad||Chip Amps||3||18th October 2004 05:11 PM|
|New proud owner of Aleph 5 freaking out 'cause of hum||bbakota2000||Pass Labs||39||2nd May 2004 04:21 PM|
|New To Site?||Need Help?|