Aleph 3 Upgrade

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi all,
i have a stock aleph 3 in my garage ( still working ) i really love it's look and think of use it again in my main rig for a 8ohm medium/bass driver.
is there a benefit if put my hands on the engine or will it be a "sacrilege" :D

i was thinking of changing the C power supply with CRC for start.
any other ideas ?

An externally hosted image should be here but it was not working when we last tested it.


aleph-3.gif
 
Last edited:
thanks to ZM , it's more clear for me now.

1 : changing 22000uf PS caps with 33000uf new ones
2 : changing stock C101 C102 C103 220uf with 470uf 100V Nichicon FG ( my favorite cap for porn) with 10nf mica or MKP bypass cap
3: delete TH1 ( chassis direct to ground)
4: and delete optional Q104

:radar:
 
Last edited:
459110d1421179834-aleph-design-reloaded-aleph-3-jfet-gif


sorry for the delay , i have made a mistake with the 1K trimpot yesterday and two IRF9610 finished in flame ::mad:

so now i am trying to re build it with a pair of 2SJ09BL
i also have a pair of 2SJ313 is it worth to use it as regulator ( Q103) or shoukd i buy a a IRF 9610 ?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.