Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

X-BOSOZ/SOZ-Lite
X-BOSOZ/SOZ-Lite
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th February 2004, 06:47 AM   #1
needtubes is offline needtubes  United States
diyAudio Member
 
Join Date: May 2003
Default X-BOSOZ/SOZ-Lite

Hi all-

I have been putting a lot of thought into all the Pass variations for use as a headphone amp. I don't want to use a high voltage, and would prefer to keep it under +/-24V. I also don't really want to have to build the CCS and provide extreme large amounts of heatsinking (not as huge an issue considering headphone use). I also don't want any electrolytic caps in the signal path, so that more or less eliminates the original Zen, Zen revisited, and other Zen variations, leaving me with just the SOZ and BOSOZ. Of course, the amp is very inefficient, and the current source resistors would be very warm. So, as was done with the Zen Lite, I though about doing a SOZ-Lite. But, the amp is for headphones... so a single SOZ gain stage won't really do. Since I am using 300-ohm Sennheiser HD580s, I need a decent amount of voltage gain. So, I figured using the BOSOZ with different resistor values to accomodate the lower voltage would be ok for a gain stage, then have that driving the modified low-power X-SOZ-Lite balanced output to eliminate need for electrolytic coupling caps (I would only have film caps on inputs and between gain stages... more tolerable than electrolytics). Attached is my idea of how this could work. Comments are welcome and appreciated. Thanks!
Attached Images
File Type: jpg ssamp.jpg (49.3 KB, 664 views)

Last edited by needtubes; 10th April 2016 at 04:11 AM.
  Reply With Quote
Old 29th February 2004, 12:18 PM   #2
Henrik is offline Henrik  Denmark
diyAudio Member
 
Join Date: Feb 2002
Location: Copenhagen Denmark
Hi needtubes
I have been playing around with this X-circiut in the sim. I am planning a version for speakers, but it might be nice for a headphone amp too.
With 2V ampl input you get 14V ampl out, that shoud be enough.
It dissipates 15W total, it could propably be adjustet to less.
Just a suggestion, and the scenatic may need some tuning, it's more for an example of a kind. The CCS BJT´s need some base resistors, they have to be calculated so they match the base emitter current.
Remember you need to rewire your headphone, since you need to connect through 4 wires total.
Best regards Henrik.
Attached Images
File Type: jpg headphone x + ccs.jpg (72.2 KB, 537 views)
__________________
Henrik
  Reply With Quote

Reply


X-BOSOZ/SOZ-LiteHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
X-lite nobody special Pass Labs 24 7th April 2006 02:11 PM
Poll! What do you use in your X-BOSOZ or BOSOZ for Volume Control and Input Selector? promitheus Pass Labs 87 19th February 2006 04:15 PM
X-bosoz vs. CCS X-bosoz, how does the sound compare? acliao Pass Labs 14 26th February 2004 01:55 AM
Zen lite chrille Pass Labs 10 15th February 2003 10:02 PM
son of Zen-lite PedroPO Pass Labs 23 25th July 2002 10:28 AM


New To Site? Need Help?

All times are GMT. The time now is 07:40 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki