I tried at the beginning of the part two but I asked in the part one too.
I made a reduced group and I got two quads very close matched. jama do trace plenty of curves of all and with his help I did get a did get a good results with a CSX1.
Ask jama, he has a very good tracer with the idea of Mike's Franquenstein one.
Best Regards
I made a reduced group and I got two quads very close matched. jama do trace plenty of curves of all and with his help I did get a did get a good results with a CSX1.
Ask jama, he has a very good tracer with the idea of Mike's Franquenstein one.
Best Regards
Of course it will happen. The boards have been shipped to me on the coast,
but I won't be able to work on them until the 1st of the month.
Also, we are considering upping the numbers available.
Of course it will happen. The boards have been shipped to me on the coast,
but I won't be able to work on them until the 1st of the month.
Also, we are considering upping the numbers available.
Sounds about right from what we've all heard, but Nelson Only Knows for sure and we don't want to nag him. I'm just doing what I'm told! However we ARE going to include brackets for mounting the PCBs and TO-3 devices because most chassis' aren't set up to accommodate this, and we'll make sure you won't have to match the VFETS because, how could you?
Mark
. I'm just doing what I'm told! However we ARE going to include brackets for mounting the PCBs and TO-3 devices because most chassis' aren't set up to accommodate this, and we'll make sure you won't have to match the VFETS because, how could you? Mark
Many thanks for the pictures and updates. I am going to do my best to snag a kit when they become available. I have been wanting to hear a SIT for a long time.
Not for this thread, excuse me guys, but Nelson I am loving the M2 with my horns out of all the 7 or 8 amps I have built including the 3 SET's.
Not for this thread, excuse me guys, but Nelson I am loving the M2 with my horns out of all the 7 or 8 amps I have built including the 3 SET's.
