Thanks again<3 mr Pass
Personaly is like Christmass gift to me with a delay
Very appreciated and breath taking article , made with care this is a example of strong giant level work especialy in busy period of time.
Great !
What i have learn quickly:
1* Only two pairs of 2SJ28 / 2SK82 SIT's give two mono chanels
2* NOT MATCHED pairs is ok for this amp !
3* Input XLR and RCA can be adjusted with very simple buffer if need
4* Sony CSX2 amplifier have simpler power supply
5* probably diyAudio store sell PSU pcb's for diyers ( must be verified once )
6* This is not big bucks build is rather economic
7* This is sound unique SIT push-pull class A amplifier
8* Match very well with big magnets alnico speakers drivers
Many good news and sir Nelson Pass you are the Champion!
Personaly is like Christmass gift to me with a delay
Very appreciated and breath taking article , made with care this is a example of strong giant level work especialy in busy period of time.
Great !
What i have learn quickly:
1* Only two pairs of 2SJ28 / 2SK82 SIT's give two mono chanels
2* NOT MATCHED pairs is ok for this amp !
3* Input XLR and RCA can be adjusted with very simple buffer if need
4* Sony CSX2 amplifier have simpler power supply
5* probably diyAudio store sell PSU pcb's for diyers ( must be verified once )
6* This is not big bucks build is rather economic
7* This is sound unique SIT push-pull class A amplifier
8* Match very well with big magnets alnico speakers drivers
Many good news and sir Nelson Pass you are the Champion!
Attachments
I Got in this pages enough information for a couple of weeks. Following the news about Vfet, from the DIYaudio wind, I acquired two couples of 2sk82/J28. I wait for the news that come from the cyberspace: The temptation is high and hard to control the human/animal impulses.
Best Regards to the group and in advance: Many thanks for the incredible knowledge you are spreading among the mortals from the world.
Best Regards to the group and in advance: Many thanks for the incredible knowledge you are spreading among the mortals from the world.
Last edited:
Would it work like this ?
View attachment 407891
If you had very quiet rails it would. The output would be inverted, which
is not a problem, and I think you would want to raise the resistor values
to something more like 10 Kohm.
You are completely amazing! Just the list of what you have accomplished in several months is staggering!
Thank you. But, it just doesn't cut it. We need your face on Mount Rushmore!
:cool
I guess something like the Lundahl LL 1527 could be used. But maybe overly expensive on your shores.
https://www1.elfa.se/data1/wwwroot/assets/datasheets/05662002.pdf
https://www1.elfa.se/data1/wwwroot/assets/datasheets/05662002.pdf
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- Article - Sony VFETs part 1