Thanks, the VU meters and driver boards can be found here:
P 59WTC Hoge Precisie Vu Meter Hoofd Ontlading Platte Tafel Front Niveau Db Geluidsdruk Audio Power Meter Met backlight|Versterker| - AliExpress
P 59WTC Hoge Precisie Vu Meter Hoofd Ontlading Platte Tafel Front Niveau Db Geluidsdruk Audio Power Meter Met backlight|Versterker| - AliExpress
my first project pass f5 turbo v1 :RE
Attachments
F5t
Been working for a few months now. Many thanks to all who offered words of advice, especially Alan(itsmee).
Special thank you to Mr Pass
Been working for a few months now. Many thanks to all who offered words of advice, especially Alan(itsmee).
Special thank you to Mr Pass
Attachments
Last edited:
After the lid was finished, I had concern about the size of the ventilation holes!, especially their location to the 240 volt components. So I decided to introduce the Plexiglas plates(this amp may not always be in my ownership).
The case is all custom, with the aid of a milling machine and numerous holes drilled and tapped.
The case is all custom, with the aid of a milling machine and numerous holes drilled and tapped.
- Home
- Amplifiers
- Pass Labs
- Pictures of your diy Pass amplifier