FirstWatt B3 Preamplifier

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
5/24/08

Coming Soon:

The B1 Buffer Preamp will be available in a matter of weeks. It is configured as a “passive” selector and volume control, but with a no-feedback JFET buffer that offers ultra low distortion and noise with ultra wide bandwidth. If passive preamps have not floated your boat in the past, you need to check this one out; it resolves several interface issues that have limited the popularity of passives.

The B2 Biamp Buffer. You say you tried bi-amping but didn’t get sound you wanted? The B2 uses two pairs of the buffers found in the B1 but configured for splitting the output of the preamp with variable relative gain to two sets of power amplifiers. This allows not only isolated amplifier impedance buffering, but adjusts the gain levels for different amplifiers. Even for identical amplifier channels it also allows the subtle adjustment required to get exactly the top/bottom balance you need.

B3 Preamp. Maybe you’d like a B1 but you need some gain.

How long is soon? :D
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.