Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

X250 current readings?
X250 current readings?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 28th August 2008, 06:06 PM   #1
Trigger100 is offline Trigger100  Spain
diyAudio Member
Join Date: Jan 2008
Default X250 current readings?

I have just purchaced an X250 and the current meter needle is sitting very close to the half way point at idle.

However, the previous X250 i had always registered a lower reading only slightly above the meters rest point.

Is this a case of a more/less efficient output stage?

  Reply With Quote
Old 28th August 2008, 07:54 PM   #2
Nelson Pass is offline Nelson Pass  United States
The one and only
Nelson Pass's Avatar
Join Date: Mar 2001
X250 current readings?
Over the history of the X250 there have been some arbitrary decisions
about where the meter should sit (there is a potentiometer on the inside
to determine that). The final test is the temperature. After an hour or so
the heat sink should be about 25 degrees C. above ambient. In most cases
that means that you should be able to put your hand on the top of the sink
for about 5 to 10 seconds.

As a rule the meter is set to the "X" on the meter plate. If yours is just above
zero, then it should be looked at.

  Reply With Quote
Old 29th August 2008, 04:40 PM   #3
Trigger100 is offline Trigger100  Spain
diyAudio Member
Join Date: Jan 2008
Thanks Nelson i will look into it.

The needle is sitting just forward of the X the previous amp i had sat much lower-was just curious.

  Reply With Quote


X250 current readings?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Strange S5 K-16LS oscilloscope readings mattthegamer463 Tubes / Valves 4 7th July 2013 02:59 PM
scope readings east electronics Solid State 27 6th March 2009 01:08 PM
Scope readings <-> possible reasons Onvinyl Parts 3 24th January 2007 02:07 PM
DIY Readings... Remedial Instruments and Amps 6 30th June 2004 02:00 AM
diode readings sriegel Solid State 2 21st January 2002 11:55 PM

New To Site? Need Help?

All times are GMT. The time now is 04:09 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio