Q: Zen-lite with -30~+30 voltage rail?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I want to build a Zenlite cooperated with an existed power-supply with -30 and +30 voltage rails. Hence, I modified some points in the original circuit, as shown in the attached drawing.

Is it ok? Thanks.
 

Attachments

  • zen-lite circuit -2-var voltage rail.jpg
    zen-lite circuit -2-var voltage rail.jpg
    35.3 KB · Views: 264
The one and only
Joined 2001
Paid Member
Unfortunately, the design depends on very low noise from the
(-) voltage rail. In the original, that rail is ground, so there is
no problem. In your proposed modification, the noise at the
Source of the Mosfet will be amplified.

I suggest that you simply tie the V+ and V- together to form
V+ and ground, with the positive at twice the original value.

:cool:
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.