Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

Threshold S/550e Bias advice
Threshold S/550e Bias advice
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 28th April 2007, 02:09 PM   #1
Barry1 is offline Barry1  United States
diyAudio Member
Join Date: Apr 2007
Location: Philadelphia
Unhappy Threshold S/550e Bias advice

Iím an amateur and need some help with setting the bias on a newly acquired Threshold S/550e. I have a manual & related info for Threshold amplifiers with the same topology, but no specifics for this one.

Iím guessing the amp needs biasing because the heat sinks are running at 31 Ė 35C even after an all night warm-up and Ĺ hour of playing time. The operating manual I have is for all the Stasis amps, S/350e to 1600e, class A/AB, as well as the pure class A, S/4e through S/12e. It gives no S/550e biasing instructions. However, in another manual posted on NPís website it says, Ďthe E series amps are designed to run at 45 -50 degreesí, but the amps referenced are the Class A varieties & the bigger A/AB 1600e.

The schematic for the SA12e shows only one variable resistor, P1, a 10K trimpot, in the front end circuitry (which I hope I attached). That must set the bias, right?

Iím assuming I would use standard procedures adjusting that trimpot and taking my readings across one of the 1 ohm emitter resistor on the final output stage rechecking again in another 5 minutes or so.

I only have bias voltages for an S/500, the earlier model, which are 100mV cold and 75mV hot. Do these values sound right? Any other related advice?

If you have something to e-mail related to this Iím at: barrysandy@comcast.net.

Thanks for your help! Barry
  Reply With Quote


Threshold S/550e Bias adviceHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Threshold S/500 bias set up anyone? stevieg123 Pass Labs 31 24th August 2016 05:31 PM
Threshold S/550e to SA/4e conversion? Barry1 Pass Labs 2 1st January 2009 04:43 PM
Threshold SA4/e bias nchelazzi Pass Labs 2 16th June 2008 08:10 PM
Threshold S/550e Service Manual Barry1 Pass Labs 10 24th May 2007 12:35 PM
Threshold S/550e Info EchoWars Solid State 7 9th July 2006 06:03 AM

New To Site? Need Help?

All times are GMT. The time now is 11:13 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio