Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc.

Easiest way to cut PCB's?
Easiest way to cut PCB's?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 22nd August 2005, 06:51 AM   #1
Dr.H is offline Dr.H
diyAudio Member
Join Date: Apr 2002
Default Easiest way to cut PCB's?

Hello all

Which method do you use to cut your PCB's. Mine are made of a material similar to fibreglass and they are therefore relatively tough.

Methods I have tried:

1. Score with a stanleyknife and then break-takes a long time to do this....

2. Use an angle-grinder (!!)-very effective/fast, but generates lots of dust (!!).

Any other easy, clean methods?
  Reply With Quote
Old 22nd August 2005, 07:21 AM   #2
mangrovejack is offline mangrovejack  Australia
diyAudio Member
Join Date: Dec 2004
Location: Brisbane
A Guillotine is the easiest.

You could also use a hacksaw or a Dremel with cutting disc to cut it. ( I use the Dremel route for my boards and it works fine). Just give it a bit of sandpapering afterwards for a nice straight smooth line (provided you can cut straight with the dremel).
  Reply With Quote
Old 22nd August 2005, 07:33 AM   #3
BWRX is offline BWRX  United States
diyAudio Moderator Emeritus
BWRX's Avatar
Join Date: Jan 2005
Location: Pennsylvania
Score a straight cut line with a utlity knife then cut with a hack saw along the line and sand edge smooth. Kind of a compromise between the score and break and dremel methods. Some dust (not a lot airborne), fairly fast, and a nice straight edge.
  Reply With Quote
Old 22nd August 2005, 02:48 PM   #4
AudioWizard is offline AudioWizard  France
diyAudio Member
Join Date: Feb 2005
Location: Southern France
I concur, a guillotine is the best tool you can use for that.

The problem is that it's a bit expensive. You can try one of those office guillotines, but you'll need to get one that can cut through at least 2 mm of paper. The blade is going to need resharpened on a regular basis, since fiberglass is very hard on tools. I've heard some people use an office guillotine with good success. Of course, if you need a professional tool, there are expensive guillotines that can cut through metal as well. Pretty handy to make metal cases and such.

I've used a Dremel tool with a cutting disc before. It works well, but it's hard to guide it in a perfectly straight line; besides, it generates a lot of dust and it's a bit dangerous too (once, I've had the disc explode while cutting; fortunately I always cut so as not to be in the direction of the disc. The bits hit the wall pretty violently.)

Some people also use some kind of rotating saw (that's normally used to cut ceramic tiling pieces. Apparently it works well, but you'll lose more material since the cutting line is pretty wide. On the other hand, it's fast, tough and you can get one of those for pretty cheap.
  Reply With Quote
Old 22nd August 2005, 03:20 PM   #5
mzzj is offline mzzj  Finland
diyAudio Member
Join Date: Jul 2005
Location: 65N 25E
Guillotine works best, but is not cheapest possible, maybe around 50usd/eur. Tin scissors are 10 times cheaper alternative, but dont produce as nice results.

For 0.8mm glass-fiber laminate ordinary Fiskars scissors do, but dont stole your wife's precious sewing scissors
  Reply With Quote
Old 23rd August 2005, 04:17 AM   #6
TwoSpoons is offline TwoSpoons  New Zealand
diyAudio Member
TwoSpoons's Avatar
Join Date: Oct 2004
DON"T use a bandsaw. Fibreglass pcb will destroy a bandsaw blade in seconds.

Unless you have a cheap source of new blades, that is!
  Reply With Quote
Old 23rd August 2005, 05:35 AM   #7
Wombat2 is offline Wombat2  Australia
diyAudio Member
Wombat2's Avatar
Join Date: Nov 2003
Location: Brisbane
I've used the guillotine at work (after hours when no one is watching ) but the last batch of boards are very tough and I can't hold them firm enough and they "wonder" under the blade and give a rotten cut. I have cut the last couple using a hacksaw and finish off with some emery paper.
  Reply With Quote
Old 26th August 2005, 08:35 PM   #8
K-amps is offline K-amps  United States
diyAudio Member
K-amps's Avatar
Join Date: Nov 2003
Location: Indiana
If I try the guillotine or Tin scissors, won't I break the PCB?
  Reply With Quote
Old 26th August 2005, 08:53 PM   #9
AudioWizard is offline AudioWizard  France
diyAudio Member
Join Date: Feb 2005
Location: Southern France
One thing to consider if your PCB isn't too large (or doesn't have any heavy component) is to use 0.032" thick boards instead of the standard 0.064". Much easier to cut (and easier on the drilling bits too). You can cut these with no problems with an office guillotine.
  Reply With Quote
Old 26th August 2005, 09:20 PM   #10
AuroraB is offline AuroraB  Norway
diyAudio Member
AuroraB's Avatar
Join Date: May 2001
Location: Norway, -north of the moral circle..
and in what is the shape of the office guillotine after cutting???
Fiber glass is an excellent abrasive,- better than most...

If you don't have any means of guillotine cutting- or similar- scribe the board deeply on both sides with a sharp knife ,- ( Stanley knife..) -break- and file edges clean. --or just use a hack saw and file clean.. and .032 boards is just too flimsy for my taste, for serious work,- in terms of mechanical stability..............

Just believe me--- i have worked with this stuff for over 30 years.....
  Reply With Quote


Easiest way to cut PCB's?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
The easiest way to reduce box volume DAMIC Multi-Way 7 17th July 2009 05:51 AM
Easiest to build class-A? Doug Kim Solid State 17 26th September 2008 10:16 PM
Easiest way to correct this dip? JCoffey Multi-Way 12 11th June 2007 12:52 PM
cleanest/ easiest EQ rick57 Digital Source 15 1st July 2005 03:52 PM
Bets and easiest type of amp? T_Lav Solid State 4 13th September 2001 04:35 AM

New To Site? Need Help?

All times are GMT. The time now is 08:49 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio