Hi all, can I substitute 2SC3502 for KSC2690 in the attached circuit?
http://rtellason.com/transdata/2sa1380.pdf
https://www.mouser.com/datasheet/2/149/KSC2690A-889454.pdf
With thanks,
http://rtellason.com/transdata/2sa1380.pdf
https://www.mouser.com/datasheet/2/149/KSC2690A-889454.pdf
With thanks,
Attachments
There aren't any ksc2690 on the schematic.
If the ksc2690 are in place of the ksc1027, yeah, sure. 3520 are higher voltage, may have a little higher Cbe but probably should work.
Incidently when subbing ksc for 2sc parts, use the fairchild datasheet, not the sanyo or toshiba one. Some parameters may be different. I found it on datasheetcatalog.com.
If the ksc2690 are in place of the ksc1027, yeah, sure. 3520 are higher voltage, may have a little higher Cbe but probably should work.
Incidently when subbing ksc for 2sc parts, use the fairchild datasheet, not the sanyo or toshiba one. Some parameters may be different. I found it on datasheetcatalog.com.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.