Hi everyone,
I have a problem with a Valvo Ba, made 1944. After running for a bit more than 30 minutes it becomes the source of crackling overlaid over (white) noise. Changing tubes from one channel to the other made the noise follow along. It sounds like a bad connection.
I cleaned the pins and the socket, still noisy after a while. Should I try to resolder the pins?
Best,
Daniel
I have a problem with a Valvo Ba, made 1944. After running for a bit more than 30 minutes it becomes the source of crackling overlaid over (white) noise. Changing tubes from one channel to the other made the noise follow along. It sounds like a bad connection.
I cleaned the pins and the socket, still noisy after a while. Should I try to resolder the pins?
Best,
Daniel
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.