Hi,
Member neutron7 does lovely work!
http://www.diyaudio.com/forums/showthread.php?s=&threadid=105823&highlight=
Cheers!
Member neutron7 does lovely work!
http://www.diyaudio.com/forums/showthread.php?s=&threadid=105823&highlight=
Cheers!
Maybe browse the Mouser online catalog... Alcoswitch (now owned by Tyco) has a large offering of machined alloy knobs in many styles. You do have to look to find a cutting-edge style that matches your cutting-edge design.
For some other nice bits, I recently tried Front Panel Express and had some nice end panels made for an interface box (XLR balanced to RCA unbalanced 4:1) built in a Hammond 1455 series extruded alloy case. They machined the mounting holes for XLR connectors, RCA jacks, switches and countersunk holes with color-filled engraving. Quite nice and not too expensive.
Like Microsoft said, if you can't make it work well, at least make it look pretty.
http://www.mouser.com
http://www.frontpanelexpress.com
Regards, KM
For some other nice bits, I recently tried Front Panel Express and had some nice end panels made for an interface box (XLR balanced to RCA unbalanced 4:1) built in a Hammond 1455 series extruded alloy case. They machined the mounting holes for XLR connectors, RCA jacks, switches and countersunk holes with color-filled engraving. Quite nice and not too expensive.
Like Microsoft said, if you can't make it work well, at least make it look pretty.
http://www.mouser.com
http://www.frontpanelexpress.com
Regards, KM
kevinkr said:
Those are pretty nice. I also like the Cary knobs from AES and the AudioNote knobs from Parts Connexion.
There's also THL Audio, they have quite a large selection of knobs. Although, just a word of caution, I've had mixed results dealing with them in terms of delivery times and communication.
And if FPE is to your liking you really should have a look at www.cam-expert.com - same service, can even accept FPE generated files and usually 10 to 15% cheaper. And faster to boot!
And if FPE is to your liking you really should have a look at www.cam-expert.com - same service, can even accept FPE generated files and usually 10 to 15% cheaper. And faster to boot!
Try these guys..all sorts of weird knobs old, ancient, new.
www.surplussales.com
_________________________________________Rick........
www.surplussales.com
_________________________________________Rick........
EHC aluminum knobs: http://www.ehcknobs.com/selector/index.php?series=101 (available at Allied Electronics)
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Design & Build
- Parts
- source for knobs