Hi all,
The company I work for is building a high end watch winding device, but we need to source a rotary selctor to operate the product. The dial/selector needs to have a quality, weighted feel, and I thought a Hi Fi component would be ideal.
I've contacted amplifier manufacturers but they haven't been much help, so I was wondering where the 'DIYers' got these components from?
It needs to have at least 3 settings, (e.g. CD, Video, DVD etc) and needs to be a circular dial, and ideally no more than 50mm in diameter.
Any help greatly appreciated,
Ash
The company I work for is building a high end watch winding device, but we need to source a rotary selctor to operate the product. The dial/selector needs to have a quality, weighted feel, and I thought a Hi Fi component would be ideal.
I've contacted amplifier manufacturers but they haven't been much help, so I was wondering where the 'DIYers' got these components from?
It needs to have at least 3 settings, (e.g. CD, Video, DVD etc) and needs to be a circular dial, and ideally no more than 50mm in diameter.
Any help greatly appreciated,
Ash
Elma?
like this :http://www.thlaudio.com/ELMAmne.html
I've used Elma switches and they have good turning 'feel' with minimal 'bounce'.
like this :http://www.thlaudio.com/ELMAmne.html
I've used Elma switches and they have good turning 'feel' with minimal 'bounce'.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.