Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

PA Systems A forum for discussion of all parts of a sound reinforcement or DJ system: loudspeakers, mixers (desks) etc.

Lase elx118p question
Lase elx118p question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 7th April 2020, 01:25 AM   #1
Pravy27 is offline Pravy27  Trinidad and Tobago
diyAudio Member
Join Date: Sep 2016
Default Lase elx118p question

Good day,

Item link
Replacement Amplifier Module Electro Voice EV ELX118P Power Sub Speaker w/ DSP 653753247361 | eBay

Decided to get two of these modules off ebay at 15 a piece, can anyone give me any type of information if this can work if I use it on a b&ctbx100 15 or 18 In a tham 15 or 18 box or a bass reflex box ? I know it says 500wrms at 8ohm I don't know if it does that. Really really appreciate the feedback. Again I know it's a small amount of power but I would just rather not have a bunch of processors and heavy amps to set up and move with to stick to Powered stuff plug and play.

Just for some context I already own a pair of the eV zlx-12p tops and I just want two separate subs to go with them for a small home entertainment system. Would like to get it to play generally 35hz( I know it's low idk if doable) to 100hz(idk if doable)

Ps just want something simple to build to give me a bit of low end responses.

Help anyone, with a preferred box or lf driver... Plus I can use in small open areas and maintain some OK sub range frequencies
  Reply With Quote
Old 7th April 2020, 03:55 PM   #2
conanski is offline conanski  Canada
diyAudio Member
Join Date: Mar 2013
Yes that will work but you don't need a TBX with that amp... kind of a waste. If you have plans to upgrade the amp at a later date then of course that changes things but if not something like a Eminence Kappa ProLF or equivalent would do the trick and save you some $$.

That appears to be a nice little amp, of course 500w isn't much these days and the amp isn't much to look at but that is the story with digital plate amps. The EV ELX amp isn't any more impressive looking and it doesn't have DSP so that one is better in that regard, and looks like the processing has enough flexability to blend with the ZLX boxes.
  Reply With Quote


Lase elx118p questionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
JBL EON618S vs EV ELX118P noiseordinance PA Systems 3 11th February 2018 02:59 PM
Phase inverter bias question and also an impedance question Illinest Instruments and Amps 8 27th December 2015 08:31 PM
Quickie woodworking question! With bonus shellac question... head_unit Construction Tips 13 12th September 2010 05:38 PM
newbie with input tran. question and wiring question imo Solid State 0 18th January 2006 10:10 PM
old speaker question, bullet midrange question & link to speaker project wallijonn Multi-Way 10 5th November 2002 06:03 AM

New To Site? Need Help?

All times are GMT. The time now is 12:19 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio