Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

PA Systems A forum for discussion of all parts of a sound reinforcement or DJ system: loudspeakers, mixers (desks) etc.

wireless microphones and phantom power
wireless microphones and phantom power
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th November 2018, 03:26 PM   #21
turk 182 is offline turk 182  Canada
diyAudio Member
 
Join Date: Oct 2012
so you need to go from a 1/4" male to XLR male?

along with pin configuration XLR's have gender male and female (females are usually in's males are out's)
something like this should do https://canada.newark.com/neutrik/na...ID=23354969332

any luck identifying the mixer? no pic's you can upload?

Last edited by turk 182; 8th November 2018 at 03:28 PM.
  Reply With Quote
Old 8th November 2018, 04:03 PM   #22
raysor is offline raysor  United Kingdom
diyAudio Member
 
Join Date: Oct 2018
Location: north Essex
Thanks for the info turk 182, the mixer turned out to be a Cerwin-Vega CVM 1624 FX USB, not very reliable, has let me down once, now only going to use it for rehearsals.
This adaptor is it to be a balanced or unbalanced 1/4 jack to go from the aux send.
  Reply With Quote
Old 8th November 2018, 05:10 PM   #23
turk 182 is offline turk 182  Canada
diyAudio Member
 
Join Date: Oct 2012
manual says unbalanced. http://www.cerwinvega.com/manuals/pr...ManualREVC.pdf

if you have reasonable solder skills, bulk mic line cable and connectors you could make your own line to feed your powered monitor.

ps sounds like the mixer needs love, sometimes a good cleaning and inspection can resolve a lot of issues and make it more reliable while waiting for budget dollars to come thru.

Last edited by turk 182; 8th November 2018 at 05:16 PM.
  Reply With Quote
Old 14th November 2018, 01:30 PM   #24
JMFahey is online now JMFahey  Argentina
diyAudio Member
 
JMFahey's Avatar
 
Join Date: Mar 2009
Location: Buenos Aires - Argentina
Quote:
Originally Posted by raysor View Post
10 inch active wedge speaker for stage use, with 1/4 inch jack and xlr inputs, ........ the aux send on the mixer is unbalanced 1/4 jack,
I need a long cable run of approx. 60 feet, can I use some sort of adaptor to connect to an XLR cable, which I have 20m of, without any problems. Thanks in advance.
Just for peace of mind

1) 60 ft is NOT a "long cable run" by any means.
Too much for a weak signal 500k impedance Guitar signal ... but you have strong 1V RMS out of that Aux Send and itīs quite low impedance, probably about 100 ohm since it certainly must come from an Op Amp output or better.
The point being you do NOT need XLR balanced cable there, just plain plug to plug shielded type.

2) the "magic" lies in balanced send at one end and balanced receive at the other, XLR connectors and matching cables by themselves will do nothing if you donīt feed them the proper blanced signal ... which you donīt have.

An "adaptor" will most probably connect pin 2 to plug hot and ground pins 1 and 3 together ... waste of time and $ in exchange of nothing.

IF you had a real long run, say 300 ft or more, *there* it would pay to add an unbalanced to balanced relatively expensive transformer at the Send end ... not really necessary here.
__________________
Design/make/service musical stuff in Buenos Aires, Argentina, since 1969.
  Reply With Quote

Reply


wireless microphones and phantom powerHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Phantom power from 9V Alexander Baev Power Supplies 2 2nd April 2015 07:55 AM
Phantom power supply from tube power transformer danshibz Power Supplies 17 27th September 2014 07:10 AM
How to *use* phantom power? .rhavin Chip Amps 12 1st September 2010 10:08 AM
Phantom Power might be Bad? mistermisfit Solid State 12 10th February 2010 09:22 PM
xlr and 48v phantom power to pc oublie PC Based 7 14th November 2009 04:40 PM


New To Site? Need Help?

All times are GMT. The time now is 08:56 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki