Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

beovox s45-2
beovox s45-2
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 10th March 2007, 02:39 AM   #1
AudioGeek is offline AudioGeek  United States
diyAudio Member
Join Date: Jan 2004
Location: Minnesota
Default beovox s45-2

got a pair of BO Beovox S45-2.

any mods on x-over?

it sounds mighty good as it is really.

any other info?
It is not you... you are it.
  Reply With Quote
Old 10th March 2007, 09:23 AM   #2
Nisbeth is offline Nisbeth  Denmark
diyAudio Member
Nisbeth's Avatar
Join Date: Jan 2001
Location: Denmark
beovox s45-2
A little if you don't already have the specs: http://www.beoworld.co.uk/beovoxs45s75.htm

  Reply With Quote
Old 10th March 2007, 02:40 PM   #3
forr is offline forr  France
diyAudio Member
forr's Avatar
Join Date: Dec 2004
Location: Next door
I own a pair of S45-2 bought 10 Euros in 1999, they are installed in a small office room (2.5 m x 4 m).
As they sound pretty good, I did'nt even open the box.
The Philips tweeter used to be one of my favourite circa 1975.
The S45-2 became impressive when I add a Sokol's circuit (an adjustable transform for the bass) ahead of the power amp. The 8' Peerless bass driver with paper cone is a very capable driver.
I also tested the very simplified version of Richard Brice's Francistein circuit which makes stereo more stable : I would recommand to try it with any pair of stereo speakers.
  Reply With Quote
Old 10th March 2007, 02:45 PM   #4
forr is offline forr  France
diyAudio Member
forr's Avatar
Join Date: Dec 2004
Location: Next door
I may add that the S45 has a Baakgard crossover said to be phase linear. Bass and tweeter are crossed at 12 or 18 dB/o, the little médium driver being a "filler" filtered with slopes of 6 dB/o on either side of the crossover frequency.
  Reply With Quote
Old 9th May 2010, 09:13 PM   #5
clh1997 is offline clh1997  Denmark
diyAudio Member
Join Date: Aug 2008
I know this thread is more than three years old - but others might Google it (as I just did).

Beovox S45-2 is a surprisingly good little speaker - and can be made even better sounding without to much work or expenses.

The capacitors in the X-over network should be changes/replaced with some made for the purpose (audiophile type). Since it's only 3 capacitors per speaker (and all 15 uF) it won’t ruin you. I put Jantzen Cross Caps in mine - but others manufactures can be used.

Suggestions to other modifications can be found at http://forum.beoworld.org/forums/t/32520.aspx

Best regards - Claus
  Reply With Quote
Old 9th July 2010, 12:41 AM   #6
frank12391 is offline frank12391  Australia
diyAudio Member
frank12391's Avatar
Join Date: Jun 2010
Location: Sydney Australia
Send a message via Yahoo to frank12391
I know this is an old thread but I'm doing up a set of Beovox S45 - 2 ATM. Does anyone know what the resister values are?
  Reply With Quote
Old 9th June 2012, 01:47 AM   #7
Gunnar02 is offline Gunnar02  Denmark
diyAudio Member
Join Date: Jun 2012
And now a new post in this "vintage" thread:
I've just gotten 2 sets of these S45-2 speakers:
The First set I got had some problems:
A solderjoint went bad on one of the bass-cones, and the two speakers didn't quite match up, plus the bass frequencies where somewhat too pronounced (could be due to the old electrolytics .. )...nevertheless they indicated that these speakers could sound very fine.
So I got another set (they are easy to find for cheap around here)

The second set had no problems, matches up very fine, and sound pretty good as is.

The caps will be upgraded in the near future plus minor improvements will be made to the cabinets (dampening, stiffening) = a few improvements described in detail in a Danish vintage-HiFi forum.

But even without the improvements these speakers sound pretty good... very musical

JFYI: I'm using these speakers with a The Fisher x-100....I'll probably later upgrade to some open-baffle AlNiCo speakers, but for now this is the best sound I've had so far
  Reply With Quote


beovox s45-2Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
B&O BEOVOX M70-CrossoverSchematic ROVSING Multi-Way 0 23rd January 2009 04:11 PM
FREE - Bang & Olufsen Beovox 5700 (UK) Greg3333 Swap Meet 3 17th August 2008 01:11 AM

New To Site? Need Help?

All times are GMT. The time now is 06:27 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio