Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

TL damping
TL damping
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 18th January 2007, 09:45 PM   #1
kro5998 is offline kro5998  Netherlands
diyAudio Member
Join Date: Dec 2004
Location: Tilburg
Default TL damping

I've build a speaker setup with closed cabinets for the mid/high's and transmissionlines for the low end.

The only thing left to do is to apply damping material in the transmissionlines.

I know that the damping influences the impedance of the TL but that is not an issue since i am using seperate amps for the TL's.
Using more damping material decreases the amount of high frequencies radiated by the port but what should i look for when using speakerworkshop?
Does the output of the port have to fall of above the resonance frequency with a first order slope?

any input would be welcome

  Reply With Quote
Old 19th January 2007, 05:43 AM   #2
bobhayes is offline bobhayes  Australia
diyAudio Member
bobhayes's Avatar
Join Date: Sep 2004
Location: Bungawalbyn, NSW
You should post this in the fullrange forum, as there is a great deal of TL experience there.
  Reply to this post


TL dampingHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Damping factor in DIY amp jaya000 Solid State 25 25th September 2008 11:27 AM
What to use for damping afterglow Full Range 1 5th May 2008 08:01 AM
ZD5 damping? zdr Multi-Way 2 10th January 2008 10:16 PM
BH 5 damping kyrill Multi-Way 11 22nd June 2004 06:28 AM
Help~~damping hitboy_sw Everything Else 4 13th February 2004 02:22 PM

New To Site? Need Help?

All times are GMT. The time now is 03:57 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio