Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Floor coupling issue (I supose...)
Floor coupling issue (I supose...)
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th January 2007, 06:58 AM   #1
andruca is offline andruca  Spain
diyAudio Member
 
Join Date: Oct 2005
Default Floor coupling issue (I supose...)

Hi everybody!

So, here's my first serious DIY project. It's a 140 liter 2x12" (Eminence Delta 12LF) + horn (piezo) cab that can be used both standing and as a wedge.

An externally hosted image should be here but it no longer works. Please upload images instead of linking to them to prevent this.


An externally hosted image should be here but it no longer works. Please upload images instead of linking to them to prevent this.


An externally hosted image should be here but it no longer works. Please upload images instead of linking to them to prevent this.


The only problem I encountered is that there's a noticeable decrease in low end when used angled than when it's standing (on the floor). Could that be because of better coupling when the baffle is closer to (or in more direct contact with) the floor? Could I solve this by bracing the baffle to the angled panel (it's only braced to the back panel)?

The decrease in low end is not that big an issue but it's noticeable and I'd like to have big low end also when using the box angled (the main goal of my project, in fact) so I don't have to EQ it much. Other than that the cab is great and required very little damping inside and no stuffing.

Thanks so much for any help/opinions!

ANDRUCA
  Reply With Quote

Reply


Floor coupling issue (I supose...)Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vbe Thermal Coupling Issue sam9 Solid State 107 30th September 2018 05:20 PM
New floor standers Tesla769 Multi-Way 7 13th January 2007 08:48 PM
Equipment racks to floor & TT to wall - best de?coupling/ interfaces rick57 Everything Else 0 25th September 2006 02:10 PM
HOw close does driver need to be to floor to avoid floor bounce? Kanga Multi-Way 8 24th April 2003 06:09 AM
Replacing the floor Tim F Multi-Way 5 11th March 2003 09:14 PM


New To Site? Need Help?

All times are GMT. The time now is 01:53 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki