This is really oversimplifying things....
To get a nominal 4 ohm speaker use two 8 ohm nominal drivers wired in parallel.
The crossover "manages" impedance so the driver receives less current at various frequencies.
Check out the loudspeaker wiki, these questions have all been addressed.
Welcome to the forums. You may as well get used to the daydreaming phase, it never really stops
Dan
To get a nominal 4 ohm speaker use two 8 ohm nominal drivers wired in parallel.
The crossover "manages" impedance so the driver receives less current at various frequencies.
Check out the loudspeaker wiki, these questions have all been addressed.
Welcome to the forums. You may as well get used to the daydreaming phase, it never really stops
Dan
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.