Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

10" basS/mid for "party-speaker"
10" basS/mid for "party-speaker"
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 17th September 2005, 12:14 AM   #1
TroelsM is offline TroelsM  Denmark
diyAudio Member
TroelsM's Avatar
Join Date: May 2003
Location: AARHUS. DK
Default 10" basS/mid for "party-speaker"


Im looking for a 10" speaker to match my 1" "titanium-domes". Therefore the 10" needs to go pretty high whitout breaking up and making a lot of distortion.

The speakers are to be used as "party-speakers" which means that the efficiency is more important than "HiFi". - That said, I dont want them to be to crappy!

I have use a Zomax1065F (125W/94dB. Huge magnet, diacast chassis and a 65mm voicecoil) with this tweeter in the past and with a crossoverFreq. off 3.5Khz that was surprisingly good. Loud and clear. The only problem is that the Zomax is a pretty expensive (approx 100Euro)

I have been looking at sone Monacor units (approx 30Euro) but I have no experience with them. Any advice?

I need a 10" with a powerrating somewhere around 100W (RMS) and a sens about 93dB.

  Reply With Quote


10" basS/mid for "party-speaker"Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What makes an amplifier "bright", "warm", or "neutral"? JohnS Solid State 51 13th December 2009 07:42 PM
Dual 15" party speaker Cal Weldon Swap Meet 2 16th April 2008 12:28 AM
DIY "speaker box" ("BOOM BOX"). Help needed. MASantos Full Range 6 2nd September 2007 01:00 PM
6 1/2" Vs 8" mid/bass for a 2 way speaker Bricolo Multi-Way 6 21st November 2003 05:26 AM
8" or 10" bass speaker for sealedbox Ralph Multi-Way 4 13th September 2003 11:30 PM

New To Site? Need Help?

All times are GMT. The time now is 03:26 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio