Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

My Speaker Workshop Rig
My Speaker Workshop Rig
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th November 2004, 02:24 AM   #1
bigmike216 is offline bigmike216  Canada
diyAudio Member
 
Join Date: Jul 2004
Location: BC, Canada
Default My Speaker Workshop Rig

I've been at this for a couple days.. I got an old computer from work (PIII 550, 256MB RAM) And, I've been wanting to get a permanent speaker workshop setup going, instead of the pile of components, and aligator clip leads I've been using. So, using the cable diagrams at claudio negro's homepage, I've made a sort of jig that is right in the front of the computer. It contains wiring for a loop cable, has an impedance refrence resistor, along with two calibration resistors. It's also got the wiring for doing acoustic measurements. Next project is to add one of wallin's mic preamps to the rig.

I cut some holes in one of the 5 1/4" bay filler plates for the switches. Then, started wiring. Then, drilled the other filler plate for a pair of binding posts, and two 1/4" jacks. The jig was made with parts I had in my parts bin. The big white resistor is my refrence resistor. The calibration resistors are inline with some of the wiring in the zip tied bundles.


A little modification of the soundcard:
My Speaker Workshop Rig


After the majority of the wiring:
My Speaker Workshop Rig


Finished the wiring of the panels:
My Speaker Workshop Rig

My Speaker Workshop Rig


Installed in the computer:
My Speaker Workshop Rig


Taking my first Impedance Measurement with it:
My Speaker Workshop Rig

My Speaker Workshop Rig


It works great! Measures passive components extremely accurately, and I get TS parameters that seem correct. Next on the list is to build a measurement mic, build a wallin preamp, and put the preamp inside with the jig.
  Reply With Quote

Reply


My Speaker Workshop RigHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Speaker workshop ? A_Reef_Scene Multi-Way 14 28th February 2007 01:39 AM
Speaker Workshop MMadrid Multi-Way 0 25th June 2006 08:49 AM
Speaker Workshop: the best and how to use it? rick57 Multi-Way 12 14th August 2004 12:12 AM
Which mic for speaker workshop? azira Multi-Way 2 12th February 2004 06:12 PM
Speaker workshop Ilianh Multi-Way 2 10th January 2003 10:11 PM


New To Site? Need Help?

All times are GMT. The time now is 04:26 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki