Not sure where to post this. I was talking to Ryan at vapor audio and he suggested I post on the forum and I may find what I need. I have a two way system that I need to develope a crossover for. I'm open to going active or passive at this point. I'm looking for someone that has experience with this and I'm willing to pay. Hoping to find someone close to me in the Chattanooga area.
You may find your drivers in here:
Crossover Design Archives - Madisound Speaker PDF Library
Most of these are highly competent designs. You might have to figure the box out. Reflex or Closed, an all that. Go by the woofer Qts. 0.38 and below is reflex.
Crossover Design Archives - Madisound Speaker PDF Library
Most of these are highly competent designs. You might have to figure the box out. Reflex or Closed, an all that. Go by the woofer Qts. 0.38 and below is reflex.
Please read the forum rules regarding posting in English.
Translation:
First you need to choose the speakers
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.